Medial arch instability/internal foot overload association with non-insertional Achilles tendinopathy and the 'Zone of Conflict Theory'.

BACKGROUND: Non insertional Achilles tendinopathy [AT] is a degenerative condition that is prevalent in runners. 30% have no preceding history and many runners do not develop AT. Overuse, pronation, and compromised blood supply are hypothesised as causal. The exact precipitant is still unknown. The link between medial arch instability and AT has not been made. The purpose of this study was to investigate the association between spring ligament (SL) laxity and first ray (FRI) instability, and the presence of (AT). METHODS: Ethical approval was obtained. Patients were identified from hospital databases for unilateral AT, allowing the opposite unaffected foot to be used as an internal control. SL laxity was measured using the lateral translation score and FRI was measured using a modified digital Klauemeter. Ultrasound was used to assess the tendoachilles [TA] in affected vs unaffected legs. RESULTS: 17 patients were recruited with a mean age of 55.6 and mean body mass index (BMI) of 33.3. The average symptom duration was 3.62 years. There were 12 left feet and 5 right feet. There was no statistical difference in dorsiflexion angles for the TA or the gastrocnemius. All Beighton scores < 5. Lateral translation scores, FRI scores and TA thickness was significantly greater in AT feet [p < 0.05]. More affected feet had Tibialis posterior tendon pain (TP) [p < 0.05]. CONCLUSIONS: Feet with AT exhibit higher lateral translation scores and greater FRI compared to healthy feet, and combined with previous literature evidence, suggests alteration of the subtalar axis alters force moments that may lead to an intrinsic overload of the TA, when the foot enters a "zone of conflict". Medial arch instability, in particular SL laxity and FRI, may contribute to the development of non-insertional AT and treatment of this with early arch support may prevent progressive degeneration.

Optimal posterior screw placement configuration in Sanders 2B calcaneal fractures: A biomechanical study / Configuración y localización óptima de los tornillos posteriores en las fracturas de calcáneo Sanders 2B: estudio biomecánico

Background: Calcaneal fractures can be high energy intra-articular injuries associated with joint depression. Challenges to fracture reduction include lateral wall blow out, medial wall overlap, comminution and central bone loss. Secondary deformity such as hindfoot varus alters foot biomechanics. Minimally invasive approaches with indirect reduction of the calcaneal tuberosity to maintain the reduction using posterior screws is routinely being used in the treatment of joint depression fractures. Biomechanically, optimum screw numbers and configuration is not known. Biomechanical studies have evaluated and proposed different screw configurations, however, it is not clear which configuration best controls varus deformity. This study aims to determine the optimum screw configuration to control varus deformity in Sanders 2B calcaneal fractures. Methods: Sawbone models were prepared to replicate Sanders type 2-B fracture, with central bone loss and comminution. 0.5cm medial wedge of the calcaneal tuberosity was removed to create varus instability. After stabilising posterior facet with a single 4mm partial threaded screw, and applied an 8 hole contoured plate to stabilise the angle of Gissane, inserted one or two 7mm cannulated partially threaded Charlotte™ (Wright Medical Technology, Inc. 5677 Airline Road Arlington, TN) Headless Multi-use Compression (under image guidance) extra screws to control varus and subsidence deformity of the fracture. Coronal plane displacement of the dissociated calcaneal tuberosity fragment relative to the body when applying 5N, 10N and 20N force was measured in millimetres (mm). Results: 2 screws inserted (one medial screw into the sustentaculum talus from inferior to superior and, one lateral screw into the long axis anterior process) provides the least displacement (0.88±0.390 at 5N and 1.7±1.251 at 20N) and the most stable construct (p<0.05) when compared to other configurations...(AU)

Introducción: Las fracturas de calcáneo suelen ser lesiones intraarticulares de alta energía asociadas con hundimiento articular. Además, se añade con frecuencia el estallido de la pared lateral, la superposición de la pared medial, la conminución y la pérdida de hueso bajo la carilla articular. La deformidad secundaria, como el varo del retropié, altera la biomecánica del pie. Nuestra comunidad utiliza cada vez más abordajes mínimamente invasivos con reducción indirecta de la tuberosidad del calcáneo para mantener la reducción mediante tornillos posteriores. Hay estudios que proponen diferentes configuraciones de tornillos, tras experimentación biomecánica, pero aún no es bien conocido qué configuración controla mejor la deformidad en varo. Este estudio tiene como objetivo determinar la configuración óptima del tornillo para controlar la deformidad en varo en las fracturas de calcáneo Sanders 2B. Método: Se prepararon modelos en Sawbone para replicar la fractura de Sanders tipo 2B, con pérdida de hueso central y con conminución. Se eliminó una cuña medial de 0,5cm de la tuberosidad calcánea para crear inestabilidad en varo. Tras estabilizar el ángulo de Gissane con un tornillo aislado parcialmente roscado de 4mm y una placa moldeada, se utilizaron tornillos de compresión multiuso Charlotte (Wright Medical Technology, Inc. 5677 Airline Road Arlington, TN) sin cabeza, canulados y parcialmente roscados de 7mm insertados sobre una AK bajo escopia. El desplazamiento del plano sagital del fragmento de tuberosidad fracturado en comparación con el cuerpo al aplicar una fuerza de 5N, 10N y 20N se midió en milímetros (mm). Resultados: Dos tornillos insertados (un tornillo medial en el sustenaculum tali de inferior a superior y un tornillo lateral en el eje largo del astrágalo) proporciona el menor desplazamiento (0,88±0,390 a 5N y 1,7±1,251 a 20N) y resulta la construcción más estable (p<0,05) en comparación con otras configuraciones...(AU)

[Artículo traducido] Configuración y localización óptima de los tornillos posteriores en las fracturas de calcáneo Sanders 2B: estudio biomecánico / Optimal posterior screw placement configuration in Sanders 2B calcaneal fractures: A biomechanical study

Background: Calcaneal fractures can be high energy intra-articular injuries associated with joint depression. Challenges to fracture reduction include lateral wall blow out, medial wall overlap, comminution and central bone loss. Secondary deformity such as hindfoot varus alters foot biomechanics. Minimally invasive approaches with indirect reduction of the calcaneal tuberosity to maintain the reduction using posterior screws is routinely being used in the treatment of joint depression fractures. Biomechanically, optimum screw numbers and configuration is not known. Biomechanical studies have evaluated and proposed different screw configurations, however, it is not clear which configuration best controls varus deformity. This study aims to determine the optimum screw configuration to control varus deformity in Sanders 2B calcaneal fractures. Methods: Sawbone models were prepared to replicate Sanders type 2-B fracture, with central bone loss and comminution. 0.5cm medial wedge of the calcaneal tuberosity was removed to create varus instability. After stabilising posterior facet with a single 4mm partial threaded screw, and applied an 8 hole contoured plate to stabilise the angle of Gissane, inserted one or two 7mm cannulated partially threaded Charlotte™ (Wright Medical Technology, Inc. 5677 Airline Road Arlington, TN) Headless Multi-use Compression (under image guidance) extra screws to control varus and subsidence deformity of the fracture. Coronal plane displacement of the dissociated calcaneal tuberosity fragment relative to the body when applying 5N, 10N and 20N force was measured in millimetres (mm). Results: 2 screws inserted (one medial screw into the sustentaculum talus from inferior to superior and, one lateral screw into the long axis anterior process) provides the least displacement (0.88±0.390 at 5N and 1.7±1.251 at 20N) and the most stable construct (p<0.05) when compared to other configurations...(AU)

Introducción: Las fracturas de calcáneo suelen ser lesiones intraarticulares de alta energía asociadas con hundimiento articular. Además, se añade con frecuencia el estallido de la pared lateral, la superposición de la pared medial, la conminución y la pérdida de hueso bajo la carilla articular. La deformidad secundaria, como el varo del retropié, altera la biomecánica del pie. Nuestra comunidad utiliza cada vez más abordajes mínimamente invasivos con reducción indirecta de la tuberosidad del calcáneo para mantener la reducción mediante tornillos posteriores. Hay estudios que proponen diferentes configuraciones de tornillos, tras experimentación biomecánica, pero aún no es bien conocido qué configuración controla mejor la deformidad en varo. Este estudio tiene como objetivo determinar la configuración óptima del tornillo para controlar la deformidad en varo en las fracturas de calcáneo Sanders 2B. Método: Se prepararon modelos en Sawbone para replicar la fractura de Sanders tipo 2B, con pérdida de hueso central y con conminución. Se eliminó una cuña medial de 0,5cm de la tuberosidad calcánea para crear inestabilidad en varo. Tras estabilizar el ángulo de Gissane con un tornillo aislado parcialmente roscado de 4mm y una placa moldeada, se utilizaron tornillos de compresión multiuso Charlotte (Wright Medical Technology, Inc. 5677 Airline Road Arlington, TN) sin cabeza, canulados y parcialmente roscados de 7mm insertados sobre una AK bajo escopia. El desplazamiento del plano sagital del fragmento de tuberosidad fracturado en comparación con el cuerpo al aplicar una fuerza de 5N, 10N y 20N se midió en milímetros (mm). Resultados: Dos tornillos insertados (un tornillo medial en el sustenaculum tali de inferior a superior y un tornillo lateral en el eje largo del astrágalo) proporciona el menor desplazamiento (0,88±0,390 a 5N y 1,7±1,251 a 20N) y resulta la construcción más estable (p<0,05) en comparación con otras configuraciones...(AU)

Optimal posterior screw placement configuration in Sanders 2B calcaneal fractures: A biomechanical study.

BACKGROUND: Calcaneal fractures can be high energy intra-articular injuries associated with joint depression. Challenges to fracture reduction include lateral wall blow out, medial wall overlap, comminution and central bone loss. Secondary deformity such as hindfoot varus alters foot biomechanics. Minimally invasive approaches with indirect reduction of the calcaneal tuberosity to maintain the reduction using posterior screws is routinely being used in the treatment of joint depression fractures. Biomechanically, optimum screw numbers and configuration is not known. Biomechanical studies have evaluated and proposed different screw configurations, however, it is not clear which configuration best controls varus deformity. This study aims to determine the optimum screw configuration to control varus deformity in Sanders 2B calcaneal fractures. METHODS: Sawbone models were prepared to replicate Sanders type 2-B fracture, with central bone loss and comminution. 0.5cm medial wedge of the calcaneal tuberosity was removed to create varus instability. After stabilising posterior facet with a single 4mm partial threaded screw, and applied an 8 hole contoured plate to stabilise the angle of Gissane, inserted one or two 7mm cannulated partially threaded Charlotte™ (Wright Medical Technology, Inc. 5677 Airline Road Arlington, TN) Headless Multi-use Compression (under image guidance) extra screws to control varus and subsidence deformity of the fracture. Coronal plane displacement of the dissociated calcaneal tuberosity fragment relative to the body when applying 5N, 10N and 20N force was measured in millimetres (mm). RESULTS: 2 screws inserted (one medial screw into the sustentaculum talus from inferior to superior and, one lateral screw into the long axis anterior process) provides the least displacement (0.88±0.390 at 5N and 1.7±1.251 at 20N) and the most stable construct (p<0.05) when compared to other configurations. A single medial screw into the sustentaculum tali (conf. 3) resulted in the least stable construct and most displacement (4.04±0.971 at 5N and 11.24±7.590 at 20N) (p<0.05). CONCLUSION: This study demonstrates the optimal screw configuration to resist varus in calcaneal fractures using minimally invasive techniques. Optimal stability is achieved using 2 screws; one located along the long axis of the calcaneus (varus control) and the other placed in the short axis directed towards the posterior facet of the calcaneus (control varus and subsidence). Further cadaver research would help evaluate optimal screw placement in simulated fractures to further assess reproducibility.

Optimal posterior screw placement configuration in Sanders 2B calcaneal fractures: A biomechanical study. / [Artículo traducido] Configuración y localización óptima de los tornillos posteriores en las fracturas de calcáneo Sanders 2B: estudio biomecánico.

BACKGROUND: Calcaneal fractures can be high energy intra-articular injuries associated with joint depression. Challenges to fracture reduction include lateral wall blow out, medial wall overlap, comminution and central bone loss. Secondary deformity such as hindfoot varus alters foot biomechanics. Minimally invasive approaches with indirect reduction of the calcaneal tuberosity to maintain the reduction using posterior screws is routinely being used in the treatment of joint depression fractures. Biomechanically, optimum screw numbers and configuration is not known. Biomechanical studies have evaluated and proposed different screw configurations, however, it is not clear which configuration best controls varus deformity. This study aims to determine the optimum screw configuration to control varus deformity in Sanders 2B calcaneal fractures. METHODS: Sawbone models were prepared to replicate Sanders type 2-B fracture, with central bone loss and comminution. 0.5 cm medial wedge of the calcaneal tuberosity was removed to create varus instability. After stabilising posterior facet with a single 4 mm partial threaded screw, and applied an 8 hole contoured plate to stabilise the angle of Gissane, inserted one or two 7 mm cannulated partially threaded CharlotteTM (Wright Medical Technology, Memphis, USA) Headless Multi-use Compression (under image guidance) extra screws to control varus and subsidence deformity of the fracture. Coronal plane displacement of the dissociated calcaneal tuberosity fragment relative to the body when applying 5 N, 10 N and 20 N force was measured in millimetres (mm). RESULTS: 2 screws inserted (one medial screw into the sustentaculum talus from inferior to superior and, one lateral screw into the long axis anterior process) provides the least displacement (0.88 ± 0.390 at 5 N and 1.7 ± 1.251 at 20 N) and the most stable construct (p < 0.05) when compared to other configurations. A single medial screw into the sustentaculum tali (conf. 3) resulted in the least stable construct and most displacement (4.04 ± 0.971 at 5 N and 11.24 ± 7.590 at 20 N) (p < 0.05). CONCLUSION: This study demonstrates the optimal screw configuration to resist varus in calcaneal fractures using minimally invasive techniques. Optimal stability is achieved using 2 screws; one located along the long axis of the calcaneus (varus control) and the other placed in the short axis directed towards the posterior facet of the calcaneus (control varus and subsidence). Further cadaver research would help evaluate optimal screw placement in simulated fractures to further assess reproducibility.

The role of cadaveric simulation in talus fracture research: A scoping review.

BACKGROUND: Talus fractures are rare (<1% of all fractures), and their rarity limits the number of studies available to guide management. In instances such as this, cadaveric studies can play an important role. The purpose of this scoping review was to identify and describe the current body of literature on cadaveric studies of fractures of the talus. METHODS: Through multiple electronic database searches (Medline, Embase, Scopus) we identified a broad body of cadaveric research into talus fractures, and these were classified into 4 main themes. Study characteristics were summarised along with any descriptive results and conclusions. RESULTS: The search yielded 484 articles of which 19 met the inclusion criteria. They provide valuable insights into benefits and drawbacks of surgical approaches to the talus, particularly with regard to direct visualisation of anatomic reduction, and risks of neurovascular or tendon compromise. For talar neck fractures it is clear that cannulated screws offer superior fixation over plates, however, are inferior when considering anatomic reduction of the fracture. Direct visualisation of fracture reduction is far superior to intraoperative radiographic assessment, and mal-reduction leads to reduced subtalar joint range of motion, midfoot deformity, and increased joint contact pressures. CONCLUSIONS: This study provides a summary of the existing literature surrounding the use of cadaver studies in fractures of the talus. We have identified gaps in the literature, particularly surrounding strength of fixation of new locking plate fixation techniques.

Plantar fasciitis.

INTRODUCTION: In this article we look at the aetiology of plantar fasciitis, the other common differentials for heel pain and the evidence available to support each of the major management options. We also review the literature and discuss the condition. METHODS: A literature search was performed using PubMed and MEDLINE(®). The following keywords were used, singly or in combination: 'plantar fasciitis', 'plantar heel pain', 'heel spur'. To maximise the search, backward chaining of reference lists from retrieved papers was also undertaken. FINDINGS: Plantar fasciitis is a common and often disabling condition. Because the natural history of plantar fasciitis is not understood, it is difficult to distinguish between those patients who recover spontaneously and those who respond to formal treatment. Surgical release of the plantar fascia is effective in the small proportion of patients who do not respond to conservative measures. New techniques such as endoscopic plantar release and extracorporeal shockwave therapy may have a role but the limited availability of equipment and skills means that most patients will continue to be treated by more traditional techniques.

An alternative method for predicting size of femoral component of Oxford partial knee replacement.

BACKGROUND: No direct intra-operative measurement to determine the ideal size of the femoral component of Oxford unicompartmental knee replacement (UKR) is currently present. The aim of this study is to assess the accuracy of patients' shoe size as a predictor of femoral component size. METHODS: A retrospective study was conducted to identify the correlation between patients' shoe size (British system) and the femoral component size. After excluding patients who died (n = 2) and patients in whom the implanted femoral component size was inaccurate (n = 13), the remaining cases (93 UKR in 88 patients) formed the study sample. Postoperative radiographs were reviewed to determine femoral component fit. RESULTS: We found positive correlation between shoe size and femoral component size. In females; a shoe size from 2.5 to 6 predicted a small femoral component and shoe size from 6.5 to 8.0 predicted a medium femoral component. In males, a shoe size from 6 to 9.5 predicted a medium femoral component and a shoe size from 10 to 13 predicted a large femoral component. This relation predicted the femoral component size accurately in 80% of cases. A subgroup analysis, after excluding patients who changed their shoe size during adulthood after foot surgery or pathology (n = 20), showed an accuracy rate of 81%. CONCLUSION: Shoe size is a simple method that predicts femoral component size more accurately than other methods currently used such as templating, tibial component size and height based on gender.

The use of cerclage wires as a suture passer in the repair of quadriceps tendon ruptures.

We describe a novel, simple and cost-effective method of passing sutures through the patella, without the need for expensive or specialised equipment.

Post-traumatic acute hallux valgus: a case report.

Hallux valgus and tibial fractures are common conditions in trauma and orthopaedics. To date, there has been no report of acute hallux valgus developing secondary to a tibial fracture. We report the case of acute post-traumatic hallux valgus due to compression of the medial plantar nerve in the tarsal tunnel.

Surgical aspects of the diabetic foot.

A comprehensive review of the literature relating to the pathology and management of the diabetic foot is presented. This should provide a guide for the treatment of ulcers, Charcot neuro-arthropathy and fractures involving the foot and ankle in diabetic patients.

The management of failed ankle replacement.

Advances in the design of the components for total ankle replacement have led to a resurgence of interest in this procedure. Between January 1999 and December 2004, 16 patients with a failed total ankle replacement were referred to our unit. In the presence of infection, a two-stage salvage procedure was planned. The first involved the removal of the components and the insertion of a cement spacer. Definitive treatment options included hindfoot fusion with a circular frame or amputation. When there was no infection, a one-stage salvage procedure was planned. Options included hindfoot fusion with an intramedullary nail or revision total ankle replacement. When there was suspicion of infection, a percutaneous biopsy was performed. The patients were followed up for a minimum of 12 months. Of the 16 patients, 14 had aseptic loosening, five of whom underwent a revision total ankle replacement and nine a hindfoot fusion. Of the two with infection, one underwent fusion and the other a below-knee amputation. There were no cases of wound breakdown, nonunion or malunion. Management of the failed total ankle replacement should be performed by experienced surgeons and ideally in units where multidisciplinary support is available. Currently, a hindfoot fusion appears to be preferable to a revision total ankle replacement.

The use of chloramphenicol ointment as an adhesive for replacement of the nail plate after simple nail bed repairs.

Fingertip injuries are common and are often repaired. The nail plate is replaced to protect the repair and maintain the alignment of the nail bed edges after repair. Once replaced, this can be secured by any means and often a suture is used. We advocate that a small bleb of chloramphenicol provides a simple method of securing the nail plate. It is fast, easy and secure. In addition it provides an antibacterial effect, which may be of some benefit.